Hegel H390 / Pro-Ject X2 / Hegel V10 / Dynaudio Contour 20i - HiFi Bundle

A Hegel H390 Integrated Amplifier and Hegel V10 Phono stage partnered to a Pro-Ject X2 turntable with an upgraded Ortofon Quintet Black cartridge. Running through a pair of Dynaudio Contour 20i - Standmount Speakers.

The H390 and V10 Phono Stage will be connected with a supplied Chord Clearway XLR cable.

Available with optional Chord OdysseyX Speaker Cables in 2 Meter and 4 Meter lengths. (These are bare wires, not terminated)

For full details and product specifications, please click on the following links:

• Source - Pro-Ject X2 - Turntable - £1199
• Cartridge - Ortofon Quintet Black - £725
• Phono Stage - Hegel V10 - £1350
• Amplifier - Hegel H390 - Integrated Amplifier - £5250
• Speakers - Dynaudio Contour 20i - Standmount Speakers - £4500
• Cables - Chord OdysseyX - Speaker Cables - £20 per metre (bare cable)
• Phono to Amp Cable - Chord Clearway XLR - £150 (1 Metre)

Source - Pro-Ject X2 - Turntable

The Pro-Ject X2 Turntable is made for those who take great joy in the fine details, the build-quality, the high-grade materials and even more audio performance. Structurally, the X2 is supported by its large, heavy, dense and stiff MDF structure, reducing unwanted resonances to almost imperceptible levels. By adding this extra mass, the X2 is even quieter, allowing the vinyl reproduction to become more detailed and precise.

The increased mass makes the tonearm an excellent fit for low compliance MC cartridges. Finished as a one-piece, with no resonance-inducing headshell, the X2 can also be set for azimuth and VTA adjustment. The TPE damped counterweight reduces arm-cartridge resonances by as much as 50%.

Technical Specifications

• Speed: 33, 45, 78 (electronic speed change)
• Principle: belt drive
• Platter: 30mm thick acryl, 2 kg heavy acryl
• Main bearing: Stainless steel
• Speed variance: 33: +/-0,25%; 45: +/-0,20%
• Wow & flutter: 33: +/-0,12%; 45: +/-0,10%
• Signal to Noise: 70 dB
• Tonearm: 9” carbon/aluminium sandwich tonearm
• Effective arm length: 9“/230 mm
• Effective tonearm mass: 13.5 g
• Overhang: 18.0 mm
• Tracking force range: 0 - 30mN (18mN recommended for Pick it 2M Silver)
• Included accessory: 15V DC / 800 mA power supply, dust cover, Connect it E Phono RCA cable, felt mat
• Power consumption: 4.5 W max / 0.3 W standby
• Dimensions: 460 x 150 x 340 mm (WxHxD) lid closed
• Weight: 10 kg net

Pro-Ject X2 Turntable - Colour Options

Amplifier - Hegel H390 - Integrated Amplifier

The Hegel H390 - Integrated Dual Mono Amplifier is very much at the tip of the spear in Hegel's pursuit of making mainstream sources sound their very best. Meaning the H390 is not just for the Audiophile. It is a product for the entire family to enjoy.

At the heart of the H390 is Hegel's patented SoundEngine 2 amplifier section. The SoundEngine 2, in many ways, works like a noise canceling headphone. A computer inside will sample what comes into the amplifier and compares it to what comes out. The computer subtracts the difference (distortion) and then add it into the music but in reverse phase.

Technical Specifications

• Power Output: 2 x 250 W into 8 Ω, Dual Mono
• Minimum Load: 2 Ω
• Analog Inputs: 1 x balanced (XLR), 2 x unbalanced (RCA)
• Digital Outputs: 1 x coaxial (BNC)
• Digital Inputs: 1 x coaxial (BNC), 1 x coaxial (RCA), 3 x optical, 1 x USB, 1 x Network
• Line level Output: 1 x unbalanced fixed (RCA), 1 x unbalanced variable (RCA)
• MQA supported Inputs: USB, BNC, Optical and Coaxial
• Frequency Response: 5 Hz - 180 kHz
• Signal-to-noise Ratio: More than 100 dB
• Crosstalk: Less than -100 dB
• Distortion: Less than 0.005% @ 50 W/8 Ω/1 kHz
• Intermodulation: Less than 0.01% (19 kHz + 20 kHz)
• Damping Factor: More than 4000 (main power output stage)
• Dimensions incl feet: 14,5 cm x 43 cm x 44 cm (HxWxD), 20 kg unit weight
• Special features: Set Startup volume | Set max volume | Software upgradable | Configure all inputs as fixed level inputs | IP control

Phono Stage - Hegel V10 Phono Stage

The Hegel V10 Phono Stage is the culmination of 30 years experience in designing discrete transistor circuits. Hegel claim to have built a phono preamplifier like no other. It is neutral, dynamic, and exceptionally transparent. Hegel engineers have used all their cumulative knowledge in amplification and applied it to one goal - To reveal as much information that is possible on the Vinyl format.

Technical Specifications

• Amplifier Typology: Ultra low noise discrete JFET transistor input stage for both MC and MM
• Gain XLR Out MM: 40dB / 45dB / 50dB / 52dB
• Gain XLR Out MC: 60dB / 65dB / 70dB / 72dB
• MC Load Impedance: Freely adjustable between 33 and 550 ohm / 47 kohm
• MM Load Capacitance: 100pF / 147pF / 220pF / 247pF / 320pF / 420pF / 467pF @ 47 kohm
• Subsonic Filter: Switchable on / off, -3dB at 20Hz, -18dB octave
• Inputs: 1 x unbalanced (RCA) MM, 1 x unbalanced (RCA) MC
• Outputs: 1 x unbalanced fixed (RCA), 1 x balanced fixed (XLR)
• Dimensions with Feet: 6cm x 21cm x 28cm, 2.4" x 8,3" x 11" (H x W x D)
• Weight: 2.2kg / 4.9lbs unit weight

Speakers - Dynaudio Contour 20i - Standmount Speakers

The new Dynaudio Contour 20i has been designed to surpass every other standmount Contour model that Dynaudio have created. By the way, it succeeds.

Dynaudio is excited to take the wraps off its new Contour i series – an extensive update to the multi-award-winning 2016 Contour range.

The family has been totally overhauled under the hood with advanced acoustic technology trickled down from the flagship Confidence range. The results are plain to hear.

Dynaudio Contour 20i - Standmount Speakers - Colour Options

Technical Specifications

• Sensitivity: 86dB (2.83V / 1m)
• IEC Power Handling: 180W
• Impedance: 4 Ω
• Frequency Response (± 3 dB): 39Hz–23kHz
• Box Principle: Bass reflex rear ported
• Crossover: 2-way
• Crossover Frequency: 2200Hz
• Crossover Topology: 2nd order
• Woofer: 18cm MSP
• Tweeter: 28mm Esotar2i
• Weight: 14kg / 30 7/8lb
• Dimensions (W x H x D): 215x440x360mm
• Dimensions with feet/grille (W x H x D): 215 x 440 x 396mm

Cables - Chord Company OdysseyX Speaker Cables

Chord Odyssey X uses the same materials as Rumour X. Odyssey’s heavier gauge conductors bring so much more detail and dynamics to a system, along with a degree of control and definition that can transform the performance of both floor and stand mounted loudspeakers. Odyssey was launched in 1998 and set a new standard of performance. It’s neutrality, its compatibility and consistency of performance from system to system made it very rapidly a very popular speaker cable.

Technical Specifications

• Conductor: Silver-plated OFC
• Insulation: PTFE
• Configuration: Twisted pair
• Shielding: None. PVC outer jacket
• AWG: 12
• mm2: 3.31
• Diameter: 8mm